Single Support Edge Protection Fixing, 140mm
A medium to heavy duty scaffold restraint bracket used for punching of scaffolding tubes vertically off a solid base material. Made from zinc plated mild steel and fitted with one drop forged fittings. It has a single hole diameter of 14mm and a leg length down the wall of 220mm, designed to spread the load through the base material or across multiple brick courses.
We also supply this fixing with spacing from facing wall of 90mm.
| Info | Detail |
|---|
| Type |
Scaffold Restraint Bracket |
| Material |
Mild Steel |
| Finish |
Bright Zinc Plated (3-5 Microns) |
| Spacing from Facing Wall |
140mm |
| Holes |
1 x 14mm |
| Standard |
BS1139-EN74 |
Full tensile loads are available on the specification sheet.
