Twin Support Edge Protection Fixing, 80mm
A medium to heavy duty scaffold restraint bracket used for punching of scaffolding tubes vertically off a solid base material. Made from zinc plated mild steel and fitted with two drop forged fittings. It has twin holes of 14mm diameter spaced 225mm apart designed to spread the load through the base material or across multiple brick courses.
We also supply this fixing with spacing from facing wall of 140mm.
| Info | Detail |
|---|
| Type |
Scaffold Restraint Bracket |
| Material |
Mild Steel |
| Finish |
Bright Zinc Plated (3-5 Microns) |
| Spacing from Facing Wall |
80mm |
| Holes |
2 x 14mm (225mm apart) |
| Standard |
BS1139-EN74 |
Full tensile loads are available on the specification sheet.
