90° Elbow End Connector DDA4 (42.4mm)

DDA tubeclamps are designed to provide non-discriminatory access to commercial and public buildings, and are designed to comply with the "Equality Act 2010 (Formerly the Disability Discrimination Act (DDA) 1995) and the Buildings Regulations 2010 – Part M: Access to and use of buildings". Complies with B.S. EN10255.

This 90 degree elbow end connector (DDA4) is designed to reduce from 48.3mm (the socket), which you could connect with a 48.3mm shot tee or 48.3mm 90 degree elbow, to continue the rail in 42.4mm. To connect this clamp to a 42.4mm tube you should use a 42.4mm internal joiner.

One end of the clamp will fit 42.4mm tubeclamps, and the other end of the clamp will fit 48.3mm tubeclamps, allowing you to use this DDA clamp for other applications.