User Reviews, Questions & Answers

Go Back

No reviews yet.

788-untreated-garden-bed.jpg
height

You don't specify how high the boards are - are they 4in, 6in, 8in???

Delta 's Answer:

Hello, these boards measure 228mm tall.

21/05/2019
Raised Garden Beds Tanalised Timber - 1.8m (6ft) x 1.2m (4ft)
Tanalised wood treatment

Is it safe to use tantalised wood if growing vegetables due to leakage of chemicals ?

Delta 's Answer:

Our pressure treatment process is completely safe for growing fruit and vegetables. New processes prevent any sort of "leakage". Please contact us for full pressure treatment details.

30/04/2018
356-basejack.jpg
Base jack

Hi

Can the jack be used with 48.3mm od scaffolding tube ?

Regards

Mick

Delta 's Answer:

Hi Yes the base jack will work with 48.3mm scaffolding tube

11/04/2018
696-PressedSteelHalfSwivel1.jpg
Hole diameter

HI can you let me know the diamter of the hole in the back of this please?

Delta 's Answer:

This hole diameter is approx. 20mm.

15/03/2018
782-timber-board-indi.jpg
Drying time

Are these boards kiln dried or will I have to dry them at home before using for a project (a table)?

Delta 's Answer:

Hi, these boards are rough cut and untreated. If used in furniture manufacture, you will need to dry them inside before uses.

04/12/2017
310-104d.jpg
What size tube?

Hi there if im using this clamp what diameter of tube should i get?

Delta 's Answer:

You would need 48.3 mm tube

05/10/2017
Raised Garden Beds Tanalised Timber - 2.4m (8ft) x 1.2m (4ft)
Dimensions

Is 2.4 x 1.2 the outside dimension?

Delta 's Answer:

Yes it is the outside dimension is 2.4 x 1.2 metres

04/10/2017
22-scaff-board1.jpg
General

Are the boards treated?

Delta 's Answer:

Hello, these boards are untreated but are graded and banded for use on scaffolding.

16/08/2017
Wall Plate 131-A (26.9mm)
pull up bar

Hi, i'm making a pull up bar and wanted to use these to anchor the steel bar to the wall. How many holes are there in the plate to secure it to the wall?

and do you think it will take my weight (10st) if the bar is approx 1.3m in length?

Delta 's Answer:

Hello, there are 4x holes in each clamp, and yes it should be fine for a pull up bar, we have done a lot of them!

11/07/2017
Raised Garden Beds Tanalised Timber - 2.4m (8ft) x 1.2m (4ft)
Wood thickness

How thick is the wood, thank you

Delta 's Answer:

The wood is 38mm thick.

27/06/2017
907-CB200_WM3.png
Brackets

are the brackets pre drilled

Delta 's Answer:

Hello, yes these brackets are pre-drilled.

16/06/2017
Treated Raised Bed Post - 2ft
How much of the post needs to be in the ground

If I'm doing double height 3m boards i.e. 18 inches high would a 2 foot post be high enough i.e. just 6 inches in the ground?

Delta 's Answer:

Yes 2ft posts would be suitable for this, but if you wanted to make the bed kit even more sturdy you could use 4ft posts.

30/05/2017
Heras Fencing Clip
Size

Will these clips attach securely to 48mm scaffold ?

Delta 's Answer:

Hello, yes these fittings will clip to 48.3mm scaffold tube.

22/05/2017
152-169d.jpg
Can this swivel be locked?

I want to construct a frame to support a waterproof sail to cover our barbeque area. I will need to fix a pole at an angle, would this bracket allow me to do so ( it will be screwed into a substantial decking beam).

Delta 's Answer:

This fixing cannot lock in place. To lock it you would need to secure the tube going into it at the other end.

16/05/2017
48.3mm (D) Hand Rail Tube 4m
Pipe I/D?

What is the I/D of this pipe?

Delta 's Answer:

The inner diameter of this pipe is approx 41.9mm.

12/05/2017
883-pin.jpg
A pair?

Is it packed in a pair or just one? Thanks

Delta 's Answer:

Hello, these log roll stakes are sold in singles.

25/04/2017
301-PressedSteelsleeveCoupler1.jpg
Nut size

Hello,

I am interested in ''Pressed Steel Sleeve Coupler'' and ''Forged Girder Coupler - Gravlok'' but I need to know nut size.
Please let me know ASAP.

With all respect

Darius Siaurusevicius

Delta 's Answer:

These nuts are 7/16ths, you can tighten/loosen them with a regular scaffolding spanner.

05/04/2017
339-145d.jpg
Can the tube pass all the way through the fitting?

i.e. can I use it to stabilise a pole half way up?

Delta 's Answer:

Hello, no the tube cannot pass all the way through. To do this you would need the use the "143D" handrail bracket tube clamp.

05/04/2017

No questions yet.