Post Support Bracket Edge Protection Fixing - Lockable
A rectangular foot plate with box section steel, designed for the temporary installation of hand rails. A multi fit bracket designed for use in a variety of substrates with a variety of fixings.
Drilled with:
- a) Two 12mm holes – one on each side to suit 10mm CS Bolts.
- b) Four 6mm holes – one in each corner for DS drill screws.
- c) One centre hole 14mm – for single centre anchor fixing.
| Info | Detail |
|---|
| Type |
Post Support Bracket |
| Material |
Mild Steel |
| Finish |
Bright Zinc Plated (3-5 Microns) |
| Holes |
See above |
| Standard |
BS1139-EN74 |
Full tensile loads are available on the specification sheet.
